Vehicle ready
Designed for garages and workshops exposed to tyres, traffic and daily use.
Services / Epoxy & Flake FlooringEpoxy &
Seamless surface systems
Epoxy &
Flake Flooring
A decorative, seamless and hard-wearing floor system built for garages, workshops, utility spaces and demanding commercial environments.
More than floor paint
Performance is built in layers.
A reliable flake floor begins below the colour. Mechanical preparation creates the profile a coating needs to bond; repairs address visible defects; compatible resin layers build strength; and the final topcoat determines texture, cleanability and long-term appearance.
The result is a continuous decorative finish without grout lines—specified for the slab, environment, expected traffic and the way the space will actually be used.
Animated system build
04
Protective topcoat
A durable clear finish locks down texture, colour and cleanability.
03
Full flake broadcast
Decorative polymer flakes are distributed to rejection for even coverage.
02
Epoxy base coat
A high-build coloured binder anchors the decorative system.
01
Concrete substrate
The existing slab is inspected, repaired and mechanically prepared.
Made for real use
Good-looking floors that work hard.
Easy to clean
A seamless surface eliminates grout lines and reduces places for grime to collect.
Hard wearing
The multi-layer system resists abrasion, impact and common workshop exposure.
Built-in texture
Flake profile and finishing choices can provide practical underfoot texture.
From private garages to commercial floors.
The system can be tailored for residential garages, workshops, laundries, plant rooms, retail back-of-house spaces and selected commercial interiors. Preparation, resin chemistry and topcoat are matched to the exposure—not chosen from colour alone.
GaragesWorkshopsUtility roomsRetailCommercialLight industrial
Installation sequence
The finish is only as good as the preparation.
Inspect
Assess moisture, contamination, cracking, existing coatings and slab condition.
Diamond grind
Mechanically open the concrete and remove weak or contaminated surface material.
Repair
Treat cracks, chips and defects before coating, subject to structural movement.
Build
Apply the selected primer or base system and broadcast decorative flake.
Seal
Scrape, refine and protect the floor with the specified clear topcoat.
Colour studio
Build the floor around your space.
Explore the complete Ultra Flake and Hyper Flake palettes, compare base colours and find a blend that works with the architecture around it.
Official manufacturer colour chart
Choose the real finish.
These are the original manufacturer colour-chart photographs. Screens and lighting still vary, so Stone Care Co. will confirm the final choice against a physical or colour-corrected sample before installation.
View manufacturer chartOngoing care
Simple maintenance. Long-term presentation.
A seamless floor is straightforward to look after, but no finish is maintenance-free. Removing grit and spills early protects the clear coat and keeps the decorative field looking consistent.
- Sweep or vacuum abrasive grit before it is tracked across the floor.
- Mop with a neutral cleaner and rinse away detergent residue.
- Use absorbent material on oils and chemicals, then clean spills promptly.
- Fit soft protection beneath sharp stands, machinery or concentrated loads.
Floor assessment
Turn the slab into part of the design.
Send photos, approximate dimensions and details about how the space is used. We’ll recommend the preparation, coating system and colour direction.